Many PCB decontamination processes do not require approval from the EPA; however, some processes do require approval. This section applies to the storage for disposal of PCBs at concentrations of 50 ppm or greater and PCB Items with PCB concentrations of 50 ppm or greater. See the national section PCB MANAGEMENT for additional information. Disassembly: Most PCB recycling and disposal starts with disassembly to recover any components that can be reused. • Administration and enforcement. State Requirements . An aboveground storage tank (AST) storing […] See Title 40 of the Code of Federal Regulations (CFR), part 761, subpart D to determine whether a disposal activity requires approval, and contact a local EPA Regional PCB Coordinator with any questions. 401 KAR 47:005, Section 1(120) and 401 KAR 47:030, Section 8. PCB materials that are no longer in use and have been declared a waste must be disposed of according to the requirements found at 40 CFR 761.60. Q. PCB congeners differ (and are defined by) the number of chlorine atoms contained within the molecule, e.g. disposal. PCB Directive Council Directive 96/59/EC of 16 September 1996 on the disposal … These requirements establish disposal options for a multitude of PCB materials including soil and debris, liquid PCBs… Any PCB waste shall be disposed of as required by subpart D of this part within 1-year from the date it was determined to be PCB waste and the decision was made to dispose of it. • Administration and enforcement. In addition to the federal regulations governing PCBs and PCB wastes, Texas has additional regulations governing the classification and disposal of such wastes. A. substances. In addition to the federal rules, Oregon has established additional siting and permitting requirements for hazardous waste and PCB treatment and disposal facilities. What are the appropriate EPA and state agency notification requirements when the PCBs at greater than 50 parts-per-million (ppm) are discovered in an aboveground storage tank (AST) storing Fuel #2 and located at the Petroleum Bulk Storage Facility? The state incorporates by reference the federal PCB management regulations included in 40 CFR 761. Removal of PCB-containing FLBs, as part of lighting upgrades or a stand-alone project, is an investment that may pay off with long-term benefits to students, school staff, the community, and the environment. In addition to federal requirements, DEP's regulations cover the disposal, storage, and monitoring of PCBs. PCB wastes are excluded if their disposal is regulated by EPA under 40 CFR 761.60, Toxic Substances Control Act (TSCA), and they are dangerous waste either because 1) they fail the Toxicity Characteristic Leaching Procedure for waste codes D018 through D043 or 2) because they are dangerous (b) Disposal in solid waste landfills. What are the requirements for PCBs handling and disposal? PCB DISPOSAL. (a) (1) Storage limitations. (1) Any person may dispose of the following PCB bulk product waste in a facility permitted, licensed, or registered by a State as a municipal … The disposal and storage of polychlorinated biphenyls (PCBs) in Pennsylvania are regulated by both state and federal rules, which are described in the national section PCB MANAGEMENT. 2-Chlorobiphenyl (2 chlorine atoms), 3-Chlorobiphenyl (3 chlorine atoms). (B) Bulk PCB remediation waste may be sent off-site for decontamination or disposal in accordance with this paragraph, provided the waste is either dewatered on-site or transported off-site in containers meeting the requirements of the DOT Hazardous Materials Regulations (HMR) at … requirements at WAC 173-303-071(3)(k). (7) In accordance with a TSCA PCB Coordinated Approval issued under § 761.77. Kentucky prohibits the land disposal of solid wastes containing concentrations of PCBs that are equal to or greater than 1 milligram per kilogram (mg/kg) (dry weight). PCBs contain a variety of materials, metal, ceramic, and organics, that need different processing through the stages of the recycling process. See the national section PCB MANAGEMENT for a discussion of the federal PCB rules.